Struct lief::pe::headers::Characteristics
pub struct Characteristics(/* private fields */);
Implementations§
§impl Characteristics
impl Characteristics
pub const NONE: Self = _
pub const RELOCS_STRIPPED: Self = _
pub const RELOCS_STRIPPED: Self = _
The file does not contain base relocations and must be loaded at its preferred base. If this cannot be done, the loader will error.
pub const EXECUTABLE_IMAGE: Self = _
pub const EXECUTABLE_IMAGE: Self = _
File is executable (i.e. no unresolved externel references).
pub const LINE_NUMS_STRIPPED: Self = _
pub const LINE_NUMS_STRIPPED: Self = _
COFF line numbers have been stripped. This is deprecated and should be 0
pub const LOCAL_SYMS_STRIPPED: Self = _
pub const LOCAL_SYMS_STRIPPED: Self = _
COFF symbol table entries for local symbols have been removed. This is deprecated and should be 0.
pub const AGGRESSIVE_WS_TRIM: Self = _
pub const AGGRESSIVE_WS_TRIM: Self = _
Aggressively trim working set. This is deprecated and must be 0.
pub const LARGE_ADDRESS_AWARE: Self = _
pub const LARGE_ADDRESS_AWARE: Self = _
App can handle >2gb addresses
pub const BYTES_REVERSED_LO: Self = _
pub const BYTES_REVERSED_LO: Self = _
Little endian: the LSB precedes the MSB in memory. This is deprecated and should be 0.
pub const NEED_32BIT_MACHINE: Self = _
pub const NEED_32BIT_MACHINE: Self = _
Machine is based on a 32bit word architecture.
pub const DEBUG_STRIPPED: Self = _
pub const DEBUG_STRIPPED: Self = _
Debugging info has been removed.
pub const REMOVABLE_RUN_FROM_SWAP: Self = _
pub const REMOVABLE_RUN_FROM_SWAP: Self = _
If the image is on removable media, fully load it and copy it to swap.
pub const NET_RUN_FROM_SWAP: Self = _
pub const NET_RUN_FROM_SWAP: Self = _
If the image is on network media, fully load it and copy it to swap.
pub const SYSTEM: Self = _
pub const SYSTEM: Self = _
The image file is a system file, not a user program.
pub const DLL: Self = _
pub const DLL: Self = _
The image file is a DLL.
pub const UP_SYSTEM_ONLY: Self = _
pub const UP_SYSTEM_ONLY: Self = _
This file should only be run on a uniprocessor machine.
pub const BYTES_REVERSED_HI: Self = _
pub const BYTES_REVERSED_HI: Self = _
Big endian: the MSB precedes the LSB in memory. This is deprecated
§impl Characteristics
impl Characteristics
pub const fn empty() -> Self
pub const fn empty() -> Self
Get a flags value with all bits unset.
pub const fn all() -> Self
pub const fn all() -> Self
Get a flags value with all known bits set.
pub const fn bits(&self) -> u32
pub const fn bits(&self) -> u32
Get the underlying bits value.
The returned value is exactly the bits set in this flags value.
pub const fn from_bits(bits: u32) -> Option<Self>
pub const fn from_bits(bits: u32) -> Option<Self>
Convert from a bits value.
This method will return None
if any unknown bits are set.
pub const fn from_bits_truncate(bits: u32) -> Self
pub const fn from_bits_truncate(bits: u32) -> Self
Convert from a bits value, unsetting any unknown bits.
pub const fn from_bits_retain(bits: u32) -> Self
pub const fn from_bits_retain(bits: u32) -> Self
Convert from a bits value exactly.
pub fn from_name(name: &str) -> Option<Self>
pub fn from_name(name: &str) -> Option<Self>
Get a flags value with the bits of a flag with the given name set.
This method will return None
if name
is empty or doesn’t
correspond to any named flag.
pub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Whether any set bits in a source flags value are also set in a target flags value.
pub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Whether all set bits in a source flags value are also set in a target flags value.
pub fn insert(&mut self, other: Self)
pub fn insert(&mut self, other: Self)
The bitwise or (|
) of the bits in two flags values.
pub fn remove(&mut self, other: Self)
pub fn remove(&mut self, other: Self)
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
remove
won’t truncate other
, but the !
operator will.
pub fn toggle(&mut self, other: Self)
pub fn toggle(&mut self, other: Self)
The bitwise exclusive-or (^
) of the bits in two flags values.
pub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Call insert
when value
is true
or remove
when value
is false
.
pub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
The bitwise and (&
) of the bits in two flags values.
pub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
The bitwise or (|
) of the bits in two flags values.
pub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
pub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
The bitwise exclusive-or (^
) of the bits in two flags values.
pub const fn complement(self) -> Self
pub const fn complement(self) -> Self
The bitwise negation (!
) of the bits in a flags value, truncating the result.
§impl Characteristics
impl Characteristics
pub const fn iter(&self) -> Iter<Characteristics>
pub const fn iter(&self) -> Iter<Characteristics>
Yield a set of contained flags values.
Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.
pub const fn iter_names(&self) -> IterNames<Characteristics>
pub const fn iter_names(&self) -> IterNames<Characteristics>
Yield a set of contained named flags values.
This method is like iter
, except only yields bits in contained named flags.
Any unknown bits, or bits not corresponding to a contained flag will not be yielded.
Trait Implementations§
§impl Binary for Characteristics
impl Binary for Characteristics
§impl BitAnd<Characteristics> for Characteristics
impl BitAnd<Characteristics> for Characteristics
§type Output = Characteristics
type Output = Characteristics
&
operator.§impl BitAndAssign<Characteristics> for Characteristics
impl BitAndAssign<Characteristics> for Characteristics
§fn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
The bitwise and (&
) of the bits in two flags values.
§impl BitOr<Characteristics> for Characteristics
impl BitOr<Characteristics> for Characteristics
§fn bitor(self, other: Characteristics) -> Self
fn bitor(self, other: Characteristics) -> Self
The bitwise or (|
) of the bits in two flags values.
§type Output = Characteristics
type Output = Characteristics
|
operator.§impl BitOrAssign<Characteristics> for Characteristics
impl BitOrAssign<Characteristics> for Characteristics
§fn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
The bitwise or (|
) of the bits in two flags values.
§impl BitXor<Characteristics> for Characteristics
impl BitXor<Characteristics> for Characteristics
§type Output = Characteristics
type Output = Characteristics
^
operator.§impl BitXorAssign<Characteristics> for Characteristics
impl BitXorAssign<Characteristics> for Characteristics
§fn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
The bitwise exclusive-or (^
) of the bits in two flags values.
§impl Clone for Characteristics
impl Clone for Characteristics
§fn clone(&self) -> Characteristics
fn clone(&self) -> Characteristics
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more§impl Debug for Characteristics
impl Debug for Characteristics
§impl Display for Characteristics
impl Display for Characteristics
§impl Extend<Characteristics> for Characteristics
impl Extend<Characteristics> for Characteristics
§fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
The bitwise or (|
) of the bits in each flags value.
source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)§impl Flags for Characteristics
impl Flags for Characteristics
§const FLAGS: &'static [Flag<Characteristics>] = _
const FLAGS: &'static [Flag<Characteristics>] = _
§fn from_bits_retain(bits: u32) -> Characteristics
fn from_bits_retain(bits: u32) -> Characteristics
§fn from_bits_truncate(bits: Self::Bits) -> Self
fn from_bits_truncate(bits: Self::Bits) -> Self
§fn from_name(name: &str) -> Option<Self>
fn from_name(name: &str) -> Option<Self>
§fn iter_names(&self) -> IterNames<Self>
fn iter_names(&self) -> IterNames<Self>
§fn intersects(&self, other: Self) -> boolwhere
Self: Sized,
fn intersects(&self, other: Self) -> boolwhere Self: Sized,
§fn contains(&self, other: Self) -> boolwhere
Self: Sized,
fn contains(&self, other: Self) -> boolwhere Self: Sized,
§fn insert(&mut self, other: Self)where
Self: Sized,
fn insert(&mut self, other: Self)where Self: Sized,
|
) of the bits in two flags values.§fn remove(&mut self, other: Self)where
Self: Sized,
fn remove(&mut self, other: Self)where Self: Sized,
&!
). Read more§fn toggle(&mut self, other: Self)where
Self: Sized,
fn toggle(&mut self, other: Self)where Self: Sized,
^
) of the bits in two flags values.§fn set(&mut self, other: Self, value: bool)where
Self: Sized,
fn set(&mut self, other: Self, value: bool)where Self: Sized,
Flags::insert
] when value
is true
or [Flags::remove
] when value
is false
.§fn intersection(self, other: Self) -> Self
fn intersection(self, other: Self) -> Self
&
) of the bits in two flags values.§fn difference(self, other: Self) -> Self
fn difference(self, other: Self) -> Self
&!
). Read more§fn symmetric_difference(self, other: Self) -> Self
fn symmetric_difference(self, other: Self) -> Self
^
) of the bits in two flags values.§fn complement(self) -> Self
fn complement(self) -> Self
!
) of the bits in a flags value, truncating the result.§impl From<Characteristics> for u32
impl From<Characteristics> for u32
§fn from(value: Characteristics) -> Self
fn from(value: Characteristics) -> Self
§impl From<u32> for Characteristics
impl From<u32> for Characteristics
§impl FromIterator<Characteristics> for Characteristics
impl FromIterator<Characteristics> for Characteristics
§fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
The bitwise or (|
) of the bits in each flags value.
§impl Hash for Characteristics
impl Hash for Characteristics
§impl IntoIterator for Characteristics
impl IntoIterator for Characteristics
§type Item = Characteristics
type Item = Characteristics
§type IntoIter = Iter<Characteristics>
type IntoIter = Iter<Characteristics>
§impl LowerHex for Characteristics
impl LowerHex for Characteristics
§impl Not for Characteristics
impl Not for Characteristics
§type Output = Characteristics
type Output = Characteristics
!
operator.§impl Octal for Characteristics
impl Octal for Characteristics
§impl Ord for Characteristics
impl Ord for Characteristics
§impl PartialEq<Characteristics> for Characteristics
impl PartialEq<Characteristics> for Characteristics
§fn eq(&self, other: &Characteristics) -> bool
fn eq(&self, other: &Characteristics) -> bool
self
and other
values to be equal, and is used
by ==
.§impl PartialOrd<Characteristics> for Characteristics
impl PartialOrd<Characteristics> for Characteristics
§fn partial_cmp(&self, other: &Characteristics) -> Option<Ordering>
fn partial_cmp(&self, other: &Characteristics) -> Option<Ordering>
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
self
and other
) and is used by the <=
operator. Read more§impl PublicFlags for Characteristics
impl PublicFlags for Characteristics
§impl Sub<Characteristics> for Characteristics
impl Sub<Characteristics> for Characteristics
§fn sub(self, other: Self) -> Self
fn sub(self, other: Self) -> Self
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
§type Output = Characteristics
type Output = Characteristics
-
operator.§impl SubAssign<Characteristics> for Characteristics
impl SubAssign<Characteristics> for Characteristics
§fn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.